210-060 practice test

1. Question 1 · 1

   Which two technologies comprise a Cisco Presence deployment? (Choose two.)

   Choose all answers that apply.

   • Cisco Unified Presence Server
   • Cisco Unity Connection
   • Cisco Unified Communications Manager
   • Active Directory
   • Cisco Unified Border Element
   • Cisco Expressway

2. Question 2 · 1

   An end user wants to log in to extension mobility, what are the user prerequisites? (Choose two.)

   Choose all answers that apply.

   • User ID
   • Password
   • Extension number
   • PIN

3. Question 3 · 1

   What command will add a second line to a ephone-dn?

   Choose one answer.

   • Ephone-dn 1 Dual-line
   • ephone-dn 3 dual-line
   • ephone-dn 2 dual-line
   • ephone-dn dual-line

4. Question 4 · 1

   A network engineer receives a report about poor quality on an active call between the IP phone of user A over the WAN to the IP phone of user B. Using web access to the phone, the network engineer remotely checks call statistics such as jitter, network delay, and packet loss. Calculated packet loss is 3%, average jitter is 20 ms, network delay is 1 ms, and conceal seconds is 7. What is the most likely problem with this call?

   Choose one answer.

   • Calculated packet loss is too high.
   • Average jitter is too high.
   • Network delay is too high.
   • Conceal seconds are too high.

5. Question 5 · 1

   Which address is required to create a video endpoint in Cisco Unified Communications Manager?

   Choose one answer.

   • MAC
   • IP
   • E.164
   • SIP URI

6. Question 6 · 1

   DRAG DROP - Drag the IP Phone Registration steps on the left with the steps on the right. Select and Place:

   Match each destination with an option.

   

   Step 1

   • • The phone uses DHCP to learn its IP address, subnet mask, default gateway and TFTP server address
   • • The phone loads its locally stored firmware image
   • • The phone contacts the TFTP server and requests its config file. Each phone has a customized config file named SEP.cnf.xml created by CUCM and uploaded to TFTP when the administrator creates or modifies the phone
   • • The phone obtains the Power (PoE or AC adapter)
   • • The phone learns the Voice VLAN ID via CDP from the switch

   Step 2

   • • The phone uses DHCP to learn its IP address, subnet mask, default gateway and TFTP server address
   • • The phone loads its locally stored firmware image
   • • The phone contacts the TFTP server and requests its config file. Each phone has a customized config file named SEP.cnf.xml created by CUCM and uploaded to TFTP when the administrator creates or modifies the phone
   • • The phone obtains the Power (PoE or AC adapter)
   • • The phone learns the Voice VLAN ID via CDP from the switch

   Step 3

   • • The phone uses DHCP to learn its IP address, subnet mask, default gateway and TFTP server address
   • • The phone loads its locally stored firmware image
   • • The phone contacts the TFTP server and requests its config file. Each phone has a customized config file named SEP.cnf.xml created by CUCM and uploaded to TFTP when the administrator creates or modifies the phone
   • • The phone obtains the Power (PoE or AC adapter)
   • • The phone learns the Voice VLAN ID via CDP from the switch

   Step 4

   • • The phone uses DHCP to learn its IP address, subnet mask, default gateway and TFTP server address
   • • The phone loads its locally stored firmware image
   • • The phone contacts the TFTP server and requests its config file. Each phone has a customized config file named SEP.cnf.xml created by CUCM and uploaded to TFTP when the administrator creates or modifies the phone
   • • The phone obtains the Power (PoE or AC adapter)
   • • The phone learns the Voice VLAN ID via CDP from the switch

   Step 5

   • • The phone uses DHCP to learn its IP address, subnet mask, default gateway and TFTP server address
   • • The phone loads its locally stored firmware image
   • • The phone contacts the TFTP server and requests its config file. Each phone has a customized config file named SEP.cnf.xml created by CUCM and uploaded to TFTP when the administrator creates or modifies the phone
   • • The phone obtains the Power (PoE or AC adapter)
   • • The phone learns the Voice VLAN ID via CDP from the switch

7. Question 7 · 1

   What is the unique identifier that is used to register an IP phone endpoint to Cisco Unified Communications Manager?

   Choose one answer.

   • MAC address
   • model
   • IP address
   • serial number

8. Question 8 · 1

   Which two options are configured on the directory number configuration page within Cisco Unified Communications Manager Administrator? (Choose two.)

   Choose all answers that apply.

   • partition
   • MAC address
   • auto answer
   • softkey template
   • common device configuration
   • max calls

9. Question 9 · 1

   With GETVPN, if a key server is configured to use multicast as the rekey transport mechanism, then under which of these conditions will the key server retransmit the rekey messages?

   Choose one answer.

   • It never retransmit the rekey messages.
   • It only retransmit the rekey message when it does not receive the rekey acknowledgment from at least one group member.
   • It only retransmit the rekey message when it does not receive the rekey acknowledgment from all group member.
   • It only retransmit the rekey message when DPD to the group members fails.
   • It always retransmit the rekey message.

10. Question 10 · 1

    An engineer is syncing Cisco Unity Connection with LDAP. Which three things should the engineer consider during this process? (Choose three.)

    Choose all answers that apply.

    • PINs and passwords are replicated from the LDAP database to Cisco Unity Connection database.
    • LDAP authentication must be configured and enabled.
    • There is no limit to the amount of LDAP filters that can be created.
    • SSL certificates from LDAP must be uploaded to Cisco Unity Connection.
    • LDAP synchronization must be configured and enabled.
    • Cisco Unity Connection supports integrations with OpenLDAP.

11. Question 11 · 1

    Which four characteristics are associated with video? (Choose four.)

    Choose all answers that apply.

    • Greedy
    • TCP retransmits
    • UDP priority
    • Delay sensitive
    • Drop sensitive
    • Benign
    • Bursty

12. Question 12 · 1

    An engineer must ensure that user data is maintained in a directory server and copied to Cisco Unity Connection via lightweight directory access protocol, but Cisco Unity Connection-specific data is locally maintained in the Cisco Unity Connection database. Which user creation accomplishes this task?

    Choose one answer.

    • Bulk administration
    • Import from CUCM via AXL
    • Import from LDAP
    • Manual creation

13. Question 13 · 1

    An IT administrator must allow a customer service department supervisor to change or modify a recorded message on their phone system. Which role is needed to accomplish this?

    Choose one answer.

    • Greeting Administrator
    • Recordings Administrator
    • Remote Administrator
    • Annunciator Administrator

14. Question 14 · 1

    Which component allows Cisco Jabber to communicate with Cisco Jabber clients who are outside the corporate network?

    Choose one answer.

    • Cisco Extension Mobility
    • Cisco TMS
    • Cisco Mobility Remote Destination
    • Cisco Unified RTMT
    • Cisco Mobile and Remote Access

15. Question 15 · 1

    What are three ways for an administrator to create users in Cisco Unity Connection? (Choose three.)

    Choose all answers that apply.

    • Use the Bulk Administration Tool
    • Import from Cisco Unified Communications Manager Express
    • Import from a Microsoft Word document
    • Import from an Adobe PDF document
    • Use manual creation
    • Import from a Microsoft Outlook contacts list G. import from LDAP
    • import from LDAP

Paid access to all 49 questions

Each purchase applies to this certification. Prices are one-time payments, not monthly subscriptions.