2V0-13.24 practice test

1. Question 1 · 1

   A customer has a database cluster running in a VCF cluster with the following characteristics: 40/60 Read/Write ratio High IOPS requirement - No contention on an all-flash OSA vSAN cluster in a VI Workload Domain Which two vSAN configuration options should be configured for best performance? (Choose two.)

   Choose all answers that apply.

   • RAID 1
   • Deduplication and Compression enabled
   • RAID 5
   • Flash Read cache reservation
   • Deduplication and Compression disabled

2. Question 2 · 1

   An architect is tasked to updating the design for an existing VMware Cloud Foundation (VCF) deployment to include four vSAN ESA ready nodes. The existing deployment compromises of the following: Four homogenous vSAN ESXi ready nodes in the management domain Four homogenous ESXi nodes with iSCSI principal storage in workload domain A What should the architect recommend when including this additional capacity for application workloads?

   Choose one answer.

   • Create a new vLCM baseline workload domain with the four new nodes
   • Create a new vLCM baseline cluster in the existing workload domain with the four new nodes
   • Create a new vLCM image workload domain with the four new nodes
   • Commission the four new nodes into the existing workload domain A cluster

3. Question 3 · 1

   During a transformation project kick-off meeting, an architect highlights specific areas on which to focus while developing the new conceptual design. Which statement is the business requirement?

   Choose one answer.

   • Sites must support a network latency of less than 12 ms RTT.
   • There is no budget specifically assigned for disaster recovery.
   • The solution must continue to operate even in case of an entire datacenter failure.
   • The project should use the existing storage devices within the data center.

4. Question 4 · 1

   As part of the requirement gathering phase an architect identified following requirement for the newly deployed SDDC environment: Reduce the network latency between two application virtual machines. To meet that application owner's goal, which design decision should be included in the design?

   Choose one answer.

   • Configure DRS rule to keep the application virtual machines on the same ESXi hosts.
   • Configure Storage DRS rule to keep the application virtual machines on different datastores.
   • Configure DRS rule to separate the application virtual machines to different ESXi hosts.
   • Configure Storage DRS rule to keep the application virtual machines on the same datastore.

5. Question 5 · 1

   An architect has been tasked with reviewing a VMware Cloud Foundation design document. Observe the following requirements: REQ01: The solution must support the private cloud cybersecurity industry and local standards and controls. REQ02: The solution must ensure that the cloud services are transitioned to operation teams. REQ03: The solution must provide a self-service portal. REQ04: The solution must provide the ability to consume storage based on policies. REQ05: The solution should provide the ability to extend networks between different availability zones. Observe the following design decisions: DD01: There will be a clustered deployment of Aria Automation. DD02: There will be an integration between Aria Automation and multiple geo-located vCenter Servers. Based on the information provided, which two requirements satisfy the stated design decisions? (Choose two.)

   Choose all answers that apply.

   • REQ01
   • REQ02
   • REQ04
   • REQ05
   • REQ03

6. Question 6 · 1

   During a requirement gathering workshop, various Business and Technical requirements were collected from the customer. Which requirement would be categorized as a Business Requirement?

   Choose one answer.

   • The application should be compatible with Windows, macOS, and Linux operating systems.
   • Data should be encrypted using AES-256 encryption.
   • Decrease processing time for service requests by 30%.
   • The system should support 10,000 concurrent users.

7. Question 7 · 1

   An architect is sizing the workloads that will run in a new VMware Cloud Foundation (VCF) Management Domain, the customer has a requirement to use Aria Operations to provide effective monitoring of the new VCF Solution. What is the minimum Aria Operations Analytics node size requirement when Aria Suite Lifecycle is in VCF aware mode?

   Choose one answer.

   • Extra Large
   • Small
   • Medium
   • Large

8. Question 8 · 1

   An architect is working with a service provider to design a VMware Cloud Foundation (VCF) solution for hosting workloads for multiple tenants. The following requirements were identified: Each tenant must have full access to their own vCenter. Each tenant will manage their own identity provider for access. A total of 28 tenants will be onboarded. Each tenant will have an independent VCF lifecycle maintenance schedule. Which VCF architecture option will meet these requirements?

   Choose one answer.

   • A single VCF instance with a standard architecture model and 28 isolated SSO domains.
   • Two VCF instances with a consolidated architecture model and 14 tenant clusters each.
   • A single VCF instance with a consolidated architecture model and 28 tenant clusters.
   • Two VCF instances with a standard architecture model and 14 isolated SSO domains each.

9. Question 9 · 1

   Which statement defines the purpose of Business Requirements?

   Choose one answer.

   • Business requirements define how the goals and objectives can be achieved.
   • Business requirements define which goals and objectives can be achieved.
   • Business requirements define what goals and objectives need to be achieved.
   • Business requirements define which audience needs to be involved.

10. Question 10 · 1

    An architect is updating a design document in preparation for an expansion of their organization's existing VCF environment. Following the completion of a capacity assessment, a cluster will be expanded to support the hosting of future application deployments. Due to the length of time that has passed since the deployment of the existing solution, identical hardware is no longer available for purchase and a newer model from the same vendor has been selected. What should the architect include within the design documentation based on this approach?

    Choose one answer.

    • A constraint that the same hardware vendor as the existing hosts must be used
    • A requirement that the cluster must use diverse hardware vendors
    • A risk that identical hardware is no longer available for purchase
    • An assumption that the cluster will provide sufficient capacity for the applications

11. Question 11 · 1

    The following are a set of design decisions related to networking: DD01: Set NSX Distributed Firewall (DFW) to Block all traffic by default. DD02: Use VLANs to separate physical network functions. DD03: Connect the management interface eth0 of each NSX Edge node to VLAN 100. DD04: Deploy 2x 64-port Cisco Nexus 9300 switches for top of rack ESXi host connectivity. Which design decision would an architect include in the logical design?

    Choose one answer.

    • DD01
    • DD04
    • DD03
    • DD02

12. Question 12 · 1

    The following requirements were identified in an architecture workshop for a virtual infrastructure design project: REQ001: All virtual machines must meet the Recovery Time Objective (RTO) of twenty-four hours or less in a disaster recovery (DR) scenario. Which two test cases will verify these requirements?

    Choose all answers that apply.

    • Simulate or trigger an outage of the primary datacenter. All virtual machines must be restored within twenty-four hours or less.
    • Simulate or trigger an outage of the primary datacenter. All virtual machines must not lose more than twenty-four hours of data prior to the outage.
    • Simulate or trigger an outage of the primary datacenter. All virtual machines must be restored within four hours or less.
    • Simulate or trigger an outage of the primary datacenter. All virtual machines must not lose more than four hours of data prior to the outage.

13. Question 13 · 1

    A customer defined a requirement for the newly deployed SDDC infrastructure which will host one of the applications responsible for video streaming. Application will run be as part of a VI Workload Domain with dedicated NSX instance and virtual machines Required network throughput was defined as a 250 Gb/s. Additionally the application should provide the lowest possible latency. Which design decision should be recommended by an architect for the NSX Edge deployment?

    Choose one answer.

    • Deploy 2 large NSX Edges using SDDC Manager.
    • Deploy NSX bare-metal Edges and create Edge Cluster using NSX console.
    • Deploy 2 NSX Edges using NSX console and add to Edge cluster created in SDDC Manager.
    • Deploy 4 extra large edges using vCenter Server console.

14. Question 14 · 1

    An architect is working with a customer to design a VMware Cloud Foundation (VCF) solution that is required for a highly secure infrastructure project that must remain separated from all other virtual infrastructure. The customer has already purchased six high density vSAN ready nodes and there is no budget for additional nodes to be added for the expected lifespan of this use case. Assuming capacity is sized correctly, which VCF architecture model and topology should the Architect recommend?

    Choose one answer.

    • Multiple Instance - Single Availability Zone Standard architecture model
    • Single Instance - Multiple Availability Zone Standard architecture model
    • Single Instance - Single Availability Zone Standard architecture model
    • Single Instance Consolidated architecture model

15. Question 15 · 1

    A company will be expanding their existing VCF environment for a new application. The existing VCF environment currently has a management domain and two separate VI workload domains with different hardware profiles. The new application has the following requirements: The application will use significantly more memory than current workloads today. The application will have a limited number of licenses to run on hosts. Additional VCF and hardware costs has been approved for the application. The application will contain confidential customer information that requires isolation from other workloads. What design recommendations should the administrator document?

    Choose one answer.

    • Purchase enough matching hardware to accommodate the new applications memory requirements and expand an existing cluster to accommodate the new application. Use host affinity rules to manage the new licensing.
    • Enough identical hardware for the management domain should be ordered to accommodate the new application requirements and a new workload domain should be designed for the application.
    • Deploy a new consolidated VCF instance and deploy the new application into it.
    • A new Workload domain with hardware supporting the memory requirements of the new application should be implemented.

Paid access to all 30 questions

Each purchase applies to this certification. Prices are one-time payments, not monthly subscriptions.