2V0-41.24 practice test

1. Question 1 · 1

   What is the VMware recommended way to deploy a virtual NSX Edge Node?

   Choose one answer.

   • Through the NSX UI
   • Through automated or interactive mode using an ISO
   • Through the vSphere Web Client
   • Through the OVF command line tool

2. Question 2 · 1

   What is VMware’s recommendation for the minimum MTU requirements when planning an NSX deployment?

   Choose one answer.

   • MTU should be set to 1700 or greater across the data center network including inter-data center connections.
   • MTU should be set to 1500 or less only on inter-data center connections.
   • Configure Path MTU Discovery and rely on fragmentation.
   • MTU should be set to 1550 or less across the data center network including inter-data center connections.

3. Question 3 · 1

   In which VPN type are the Virtual Tunnel interfaces (VTI) used?

   Choose one answer.

   • SSL-based VPN
   • Route & SSL based VPNs
   • Policy & Route based VPNs
   • Route-based VPN

4. Question 4 · 1

   In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers. Which two actions could address low throughput and congestion? (Choose two.)

   Choose all answers that apply.

   • Configure ECMP on the Tier-0 gateway.
   • Configure a Tier-1 gateway and connect it directly to the physical routers.
   • Deploy Large size Edge node/s.
   • Configure NAT on the Tier-0 gateway.
   • Add an additional vNIC to the NSX Edge node.

5. Question 5 · 1

   A company security policy requires all users to log into applications using a centralized authentication system. Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

   Choose all answers that apply.

   • RSA SecureID
   • SecureDAP
   • RADII 2.0
   • LDAP and OpenLDAP based on Active Directory (AD)
   • Keygen Enterprise

6. Question 6 · 1

   An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events. Which message ID (msgid) should be used in the syslog export configuration command as a filter?

   Choose one answer.

   • FABRIC
   • SYSTEM
   • GROUPING
   • MONITORING

7. Question 7 · 1

   An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing. Which failover detection protocol must be used to meet this requirement?

   Choose one answer.

   • Host Standby Router Protocol (HSRP)
   • Beacon Probing (BP)
   • Virtual Router Redundancy Protocol (VRRP)
   • Bidirectional Forwarding Detection (BFD)

8. Question 8 · 1

   An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful. What type of network boundary does this represent?

   Choose one answer.

   • Layer 2 bridge
   • Layer 2 broadcast domain
   • Layer 2 VPN
   • Layer 3 route

9. Question 9 · 1

   What are two supported host switch modes? (Choose two.)

   Choose all answers that apply.

   • Overlay Datapath
   • Secure Datapath
   • Standard Datapath
   • Enhanced Datapath
   • DPDK Datapath

10. Question 10 · 1

    Which is an advantage of an L2 VPN in an NSX 4.x environment?

    Choose one answer.

    • Achieve better performance
    • Use the same broadcast domain
    • Enables Multi-Cloud solutions
    • Enables VM mobility with re-IP

11. Question 11 · 1

    Which two steps must an NSX administrator take to integrate VMware Identity Manager in NSX to support role-based access control? (Choose two.)

    Choose all answers that apply.

    • Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
    • Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
    • Enter the Identity Provider (IdP) metadata URL in NSX Manager.
    • Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
    • Create an OAuth 2.0 client in VMware Identity Manager.

12. Question 12 · 1

    Which three selections are capabilities of Network Topology? (Choose three.)

    Choose all answers that apply.

    • Display how the different NSX components are interconnected.
    • Display the VMs connected to Segments.
    • Display how the Physical components are interconnected.
    • Display the uplinks configured on the Tier-1 Gateways.
    • Display the uplinks configured on the Tier-0 Gateways.

13. Question 13 · 1

    Which of the two following characteristics about NAT64 are true? (Choose two.)

    Choose all answers that apply.

    • NAT64 requires the Tier-1 gateway to be configured in active-active mode.
    • NAT64 is stateless and requires gateways to be deployed in active-standby mode.
    • NAT64 is supported on Tier-0 and Tier-1 gateways.
    • NAT64 is supported on Tier-1 gateways only.
    • NAT64 requires the Tier-1 gateway to be configured in active-standby mode.

14. Question 14 · 1

    Which VMware GUI tool is used to identify problems in a physical network?

    Choose one answer.

    • VMware Aria Operations Networks
    • VMware Aria Automation
    • VMware Site Recovery Manager
    • VMware Aria Orchestrator

15. Question 15 · 1

    Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)

    Choose all answers that apply.

    • HTTPS
    • SSH
    • TCP
    • UDP
    • SSL
    • TLS

Paid access to all 78 questions

Each purchase applies to this certification. Prices are one-time payments, not monthly subscriptions.