350-601 practice test

1. Question 1 · 1

   Refer to the exhibit. The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?

   Choose one answer.

   

   • N7K-1 and N7K-2 appear as a single STP root.
   • N7K-1 appears as the STP root.
   • N7K-1 preempts N7K-2 as the STP root.
   • N7K-2 appears as the STP root.

   Read explanation

   Peer-switch - Enables the vPC switch pair to appear as a single STP root in the Layer 2 topology. Use the no form of the command to disable the peer switch vPC topology. If both switches do not have peer-switch enable, the question is not informing the bridge-ID (mac-address + priority) to see which switch would be the root anyway.

2. Question 2 · 1

   Where is the witness deployed in a two-node Cisco HyperFlex Edge deployment?

   Choose one answer.

   • to the HyperFlex Edge two-node cluster
   • to Cisco Intersight
   • to a third-party cloud provider
   • to an additional server with network access to HyperFlex Edge

3. Question 3 · 1

   Refer to the exhibit. What is the result of this series of commands?

   Choose one answer.

   

   • It reboots the server immediately.
   • It activates the firmware on the next adapter boot.
   • It updates the firmware on adapter 1/1/1 immediately.
   • It verifies the firmware update on the server.

4. Question 4 · 1

   DRAG DROP - An engineer deploys a custom guest shell rootfs onto multiple switches. Drag and drop the steps from the left into the correct order on the right. Select and Place:

   Arrange the options in the correct order.

   

   • Customize the guest shell rootfs.
   • Export the Guest Shell rootfs.
   • Store it in a file server.
   • Import the Guest Shell rootfs to other switches.
   • Install the specific Guest Shell across devices simultaneously.

5. Question 5 · 1

   The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two SPAN characteristics must be considered? (Choose two.)

   Choose all answers that apply.

   • SPAN source ports can be monitored in multiple SPAN sessions.
   • The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
   • A SPAN source port cannot be a destination SPAN port.
   • Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports.
   • The rx/tx option is available for VLAN or VSAN SPAN sessions.

6. Question 6 · 1

   Which two statements describe the process of performing an EPLD upgrade on a Cisco MDS 9000 Series Switch? (Choose two.)

   Choose all answers that apply.

   • The upgrade is performed from the standby supervisor module.
   • The upgrade process disrupts only the module that is being upgraded.
   • The upgrade is performed on the active supervisor.
   • If an upgrade is interrupted, the upgrade continues after a connection is restored.
   • Modules must be online to be upgraded.

7. Question 7 · 1

   Which two statements describe the process of upgrading an EPLD on a Cisco MDS 9000 Series Switch? (Choose two.)

   Choose all answers that apply.

   • EPLDs are only capable to be upgraded to the latest EPLD image.
   • EPLD upgrades are capable to be completed without powering down the module during the upgrade.
   • An upgrade verification identifies the impact of each EPLD upgrade.
   • The EPLDs for all the modules on a switch must be upgraded at the same time.
   • EPLDs are capable to be upgraded without replacing the hardware.

8. Question 8 · 1

   Refer to the exhibit. What is the outcome of this command when the EPLD is updated on a Cisco Nexus 9000 Series Switch?

   Choose one answer.

   

   • displays the compatibility of the EPLD upgrade and the image in the bootflash
   • shows a simulated upgrade of the EPLD
   • upgrades the EPLD on the switch disruptively
   • displays the impact of the upgrade on the operation of the switch

9. Question 9 · 1

   Refer to the exhibit. Which backup operation type does not include the Preserve Identities feature?

   Choose one answer.

   

   • full state
   • all configuration
   • logical configuration
   • system configuration

10. Question 10 · 1

    Refer to the exhibit. What is a characteristic presented in the service profile of the UUID?

    Choose one answer.

    

    • unique system generated
    • allocated from a UUID pool
    • vendor assigned
    • based on the hardware

11. Question 11 · 1

    A UCS B-Series server located in B5108 chassis 1 slot 1 is currently unavailable. The server needs to be associated with a specific service profile when it becomes available. Which associate service profile option should be selected to accomplish this goal?

    Choose one answer.

    • restrict migration
    • server pool
    • server
    • custom server

12. Question 12 · 1

    A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic. Which configuration should be applied after the physical connection is established?

    Choose one answer.

    • UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc # mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer
    • UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis/cimc # scope mgmt-conn sideband UCS-A /chassis/cimc/mgmt-conn # mgmt-conn-state enabled UCS-A /chassis/cimc/mgmt-conn* # commit-buffer
    • UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis /cimc # set mgmt-conn-state enabled UCS-A /chassis /cimc/mgmt-conn* # commit-buffer
    • UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc/mgmt-conn #set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer

13. Question 13 · 1

    Refer to the exhibit. Which type of backup is required to restore a Cisco UCS configuration?

    Choose one answer.

    

    • system configuration
    • all configuration
    • full state
    • logical configuration

14. Question 14 · 1

    Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?

    Choose one answer.

    • any service profile that uses the global-default host firmware policy
    • any service profile that uses a user-created host firmware policy
    • any service profile that has no host firmware policy defined
    • any service profile that is not in the root sub-org

15. Question 15 · 1

    An engineer is implementing Cisco Intersight in a secure environment. The environment must use LDAP directory service and ensure information integrity and confidentiality. Which two steps must be taken to implement the solution? (Choose two.)

    Choose all answers that apply.

    • Enable Certificate Signing Request in Cisco Intersight
    • Add a trusted root LDAP certificate to Cisco Intersight
    • Enable Encryption for LDAP
    • Add a self-signed LDAP certificate to Cisco Intersight
    • Add a trusted OAuth token to Cisco Intersight

Paid access to all 336 questions

Each purchase applies to this certification. Prices are one-time payments, not monthly subscriptions.