70-410 practice test

1. Question 1 · 1

   You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. An iSCSI SAN is available on the network. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. You create a LUN on the SAN to host the virtual hard drive files for the virtual machines. You need to create a 3-TB virtual hard disk for VM1 on the LUN. The solution must prevent VM1 from being paused if the LUN runs out of disk space. Which type of virtual hard disk should you create on the LUN?

   Choose one answer.

   • Dynamically expanding VHDX
   • Fixed-size VHDX
   • Fixed-size VHD
   • Dynamically expanding VHD

   Read explanation

   The virtual disk needs to be a VHDX file since it is going to be over 2TB in size and it must be fixed-size so that the space is already taken on the server (that way the server does not run out of space as the volume grows) even if the actual virtual disk does not yet hold that amount of data.

2. Question 2 · 1

   Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. On a server named Core1, you perform a Server Core Installation of Windows Server 2012 R2. You join Core1 to the adatum.com domain. You need to ensure that you can use Event Viewer on Server1 to view the event logs on Core1. What should you do on Core1?

   Choose one answer.

   • Run the Disable NetFirewallRule cmdlet.
   • Install Remote Server Administration Tools (RSAT).
   • Install Windows Management Framework.
   • Run the Enable-Com + Network Access Firewall Rule.

   Read explanation

   Information regarding IPsec policy changes, etc. can be found in the Event Viewer. Thus you need to enable the NetFirewallRule command. This will allow you to view the event logs.

3. Question 3 · 1

   HOTSPOT - You have a print server named Server1 that runs Windows Server 2012 R2. On Server1, you create and share a printer named Printer1. The Advanced settings of Printer1 are shown in the Advanced exhibit. (Click the Exhibit button.) The Security settings of Printer1 are shown in the Security exhibit. (Click the Exhibit button.) The Members settings of a group named Group1 are shown in the Group1 exhibit. (Click the Exhibit button.) Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point. Hot Area:

   Choose an option for each prompt.

   

   

   

   

   User1 can print on Printer1 on Monday at 18:00.

   • • Yes
   • • No

   User2 can print on Printer1 on Friday at 14:00.

   • • Yes
   • • No

   User1 can print on Printer1 on Sunday at 11:00.

   • • Yes
   • • No

4. Question 4 · 1

   HOTSPOT - Your network contains an Active Directory domain named contoso.com. The domain contains an organizational unit (OU) named OU1 as shown in the OU1 exhibit. (Click the Exhibit button.) The membership of Group1 is shown in the Group1 exhibit. (Click the Exhibit button.) You configure GPO1 to prohibit access to Control Panel. GPO1 is linked to OU1 as shown in the GPO1 exhibit. (Click the Exhibit button.) Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point. Hot Area:

   Choose an option for each prompt.

   

   

   

   

   User1 can access Control Panel.

   • • Yes
   • • No

   User2 can access Control Panel.

   • • Yes
   • • No

   User3 can access Control Panel.

   • • Yes
   • • No

   User4 can access Control Panel.

   • • Yes
   • • No

   Read explanation

   Group Policy does NOT APPLY TO SECURITY GROUPS, only users and computers in an OU. Consequently, the only users in the OU are User2 and User4. Since the Security Filtering specifies that the policy will only apply to users/computers in the OU who are members of Group1 or User3, User4 will not have the policy applied. Since User2 is, in fact, a member of Group1, the policy will be applied to user 2. Thus, the only user who will not be able to access the control panel is User2.

5. Question 5 · 1

   You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 has the virtual switches listed in the following table. You create a virtual machine named VM1.VM1 has two network adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2.You configure NIC teaming on VM1. You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network. What should you do on Server1?

   Choose one answer.

   

   • Run the Set-VmNetworkAdaptercmdlet.
   • Add a new network adapter to VM1.
   • Create a new virtual switch on Server 1.
   • Modify the properties of vSwitch1 and vSwitch2.

6. Question 6 · 1

   You have a server named Server1 that runs Windows Server 2012 R2. Server1 has three physical network adapters named NIC1, NIC2, and NIC3. On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10. You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails. What should you do?

   Choose one answer.

   • From Server Manager, change the load balancing mode of Team1.
   • Run the New-NetLbfoTeam cmdlet.
   • From Server Manager, add an interface to Team1.
   • Run the Add-NetLbfoTeamMember cmdlet.

7. Question 7 · 1

   Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs windows 8. DC1 is configured as a DHCP server as shown in the exhibit. (Click the Exhibit button.) Computer1 is configured to obtain an IP address automatically. You notice that Computer1 is unable to obtain an IP address from DC1. You need to ensure that Computer1 can receive an IP address from DC1. What should you do?

   Choose one answer.

   

   • Disable the Allow filters.
   • Disable the Deny filters.
   • Authorize DC1.contoso.com.
   • Activate Scope [10.1.1.0] Contoso.com.

   Read explanation

   A red down arrow indicates an unauthorized DHCP server. A DHCP server that is a domain controller or a member of an Active Directory domain queries Active Directory for the list of authorized servers (identified by IP address). If its own IP address is not in the list of authorized DHCP servers, the DHCP Server service does not complete its startup sequence and automatically shuts down.

8. Question 8 · 2

   Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that runs Windows Server 2012 R2. On Server1, you create a work folder named Work1. A user named User1 connects to Work1 from a computer named Computer1. You need to identify the last time the documents in Work1 were synchronized successfully from Computer1. What should you do?

   Choose one answer.

   • From Server Manager, review the properties of Computer1.
   • From Windows PowerShell, run the Get-SyncUserSettingscmdlet.
   • From Windows PowerShell, run the Get-SyncSharecmdlet.
   • From Server Manager, review the properties of User1.

9. Question 9 · 2

   You have a server named Server1 that runs Windows Server 2012 R2. A network technician installs a new disk on Server1 and creates a new volume. The properties of the new volume are shown in the exhibit. (Click the Exhibit button.) You need to ensure that you can enable NTFS disk quotas for volume D. What should you do first?

   Choose one answer.

   

   • Install the File Server Resource Manager role service.
   • Format volume D.
   • Run the convert.exe command.
   • Convert the disk to a dynamic disk.

   Read explanation

   ReFS-formatted disks cannot use NTFS disk quotas, so the drive must be formatted as an NTFS partition

10. Question 10 · 2

    Your network contains an Active Directory domain named contoso.com. An organizational unit (OU) named OU1 contains user accounts and computer accounts. A Group Policy object (GPO) named GP1 is linked to the domain.GP1 contains Computer Configuration settings and User Configuration settings. You need to prevent the User Configuration settings in GP1 from being applied to users. The solution must ensure that the Computer Configuration settings in GP1 are applied to all client computers. What should you configure?

    Choose one answer.

    • The GPO Status
    • The Block Inheritance feature
    • The Group Policy loopback processing mode
    • The Enforced setting

    Read explanation

    A loopback with merge option needs to be used.

11. Question 11 · 2

    You have a server named Server1 that runs Windows Server 2012 R2. You need to enable access-based enumeration for a file share on Server1. Which tool should you use?

    Choose one answer.

    • File Server Resource Manager (FSRM)
    • Share and Storage Management
    • Server Manager
    • File Explorer

    Read explanation

    Access-based enumeration displays only the files and folders that a user has permissions to access. It is a feature that was previously available as a downloadable package for the Windows Server 2003 operating system (it was also included in Windows Server 2003 Service Pack 1). Access-based enumeration is now included in the Windows Server 2008 operating system, and you can enable it by using Share and Storage Management.

12. Question 12 · 2

    You have a print server named Print1 that runs Windows Server 2012 R2. Print1 has 10 shared printers. You need to change the location of the spool folder. What should you modify?

    Choose one answer.

    • The properties of the Print Spooler service
    • The Print Server Properties
    • The user environment variables
    • The PrintQueue.inf file

13. Question 13 · 3

    Your network contains an Active Directory domain named contoso.com. All user accounts in the marketing department reside in an organizational unit (OU) named OU1. You have a Group Policy object (GPO) named GPO1. GPO1 contains Folder Redirection settings. GPO1 has default permissions. You discover that the Folder Redirection settings are not applied to the users in the marketing department. You open Group Policy Management as shown in the exhibit. (Click the Exhibit button.) You need to ensure that the Folder Redirection settings in GPO1 apply to the marketing users. What should you do?

    Choose one answer.

    

    • Modify the Delegation settings of GPO1.
    • Enable the link of GPO1.
    • Enforce GPO1.
    • Modify the link order of GPO1.

14. Question 14 · 3

    Your network contains an Active Directory domain named contoso.com. You have a starter Group Policy object (GPO) named GPO1 that contains more than 100 settings. You need to create a new starter GPO based on the settings in GPO1. You must achieve this goal by using the minimum amount of administrative effort. What should you do?

    Choose one answer.

    • Run the New-GPStarterGPO cmdlet and the Copy-GPO cmdlet.
    • Create a new starter GPO and manually configure the policy settings of the starter GPO.
    • Right-click GPO1, and then click Back Up. Create a new starter GPO. Right-click the new GPO, and then click Restore from Backup.
    • Right-click GPO1, and then click Copy. Right-click Starter GPOs, and then click Paste.

    Read explanation

    Although GPOs and Starter GPOs can both be copied, and a Starter GPO can be used to create a new GPO (as that is their purpose), an existing GPO cannot be copied to a new Starter GPO (unfortunately).

15. Question 15 · 3

    How can you manage a newly installed Windows Server 2012 R2 core from another Windows Server 2012 R2 with computer manager? Exhibit:

    Choose one answer.

    

    • 1
    • 2
    • 4
    • 8

Paid access to all 27 questions

Each purchase applies to this certification. Prices are one-time payments, not monthly subscriptions.